Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT) | |
---|---|---|
Frequency Response | 0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT) | |
Hum & Noise | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω, Input Gain = Maximum | |
Input Connectors | MIC: 6, LINE: 4 mono + 4 stereo, CH INSERT: 4, AUX RTN: 1 stereo, 2TR IN: 1 | |
Output Connectors | ST: 2, AUX SEND: 1, EFFECT SEND: 1, CH INSERT: 4, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 2 Phone: 1 | |
Crosstalk | -70 dB @ 1 kHz | |
Phantom Power | + 48 V | |
Input HPF | CH 1-4, CH 5/6-7/8, 80Hz, 12dB/oct | |
CH EQ (MONO) ±15 dB (Max.) | High | 10 k Hz: shelving |
Mid | 2.5 k Hz: peaking | |
Low | 100 Hz: shelving | |
CH EQ (STEREO) ±15 dB (Max.) | High | 10 k Hz: shelving |
Mid | — | |
Low | 100 Hz: shelving | |
Compressor (COMP) | Control x 1 (Gain/Threshold/Ratio), CH 1-4 | |
Internal Digital Effect | 16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off) | |
LED Level Meter / Pre Monitor Level | 2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB) PEAK lights if the signal comes within 3 dB of the clipping level. | |
Peak Indicator | Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu). | |
Power Supply Adapter | PA-20: AC 35VCT, 0.94A, Cable Length = 3.6m | |
Power Consumption | 30 W | |
Dimensions (W x H x D) | 346.2 mm x 86.1 mm x 436.6 mm | |
Net Weight | 3.2 kg | |
Options | Foot Switch (FC-5) |