Busses: 16 mix, 8 matrix (Input to Matrix supported)
Local I/O: 16 in, 8 out
Fader configuration: 16 + 2 (Master)
Rack mountable with RK1 Rack Mount Kit(optional)
Port-to-Port Dante Networking: Allows QL console inputs and outputs to act as a “stage box” for interconnecting with other Dante-equipped consoles
Dugan Automixing: Renowned Dan Dugan automatic microphone mixing is built-in to the console
Dual Channel Inserts: Each input channel features dual insert points for advanced signal routing and processing
Full File Compatibility with CL Series: Console mix data is fully interchangeable between CL and QL (and viceversa)
Intuitive and familiar touchscreen (same as the CLseries)
Support for AES67 interpoerability standard allowing communication withRavenna, Q-LAN, Livewire and other audio networks, for significantly improvedsystem expandability.
The Dante Device Lock feature that prevents unwanted changes to Dantesettings is also supported, enhancing system security in halls andinstallations that are routinely used by outside operators or operators whobring their own equipment.
The number of supported Shure wireless receivers has also increased.Version 4.1 additionally supports non-Dante devices including the AXT400,QLXD4 and ULXD4. Control and monitoring are supported for all devices, plustransmitter gain control for the AXT400.
Other features include one-operation EQ type selection, improved RTAvisibility and patch window effect type and channel name displays.
Mounting and patching of the Audinate Dante-MY16-AUD2 mini-YGDAI card and d&baudio technik DS10 Audio Network Bridge are also supported.
Yamaha QL1 Specifications:
Sampling Frequency:
Internal: 44.1 kHz, 48 kHz
External:
44.1 kHz, +4.1:667%, +0.1%, –0.1%, –4.0% ±200ppm
48kHz, +4.1667%, +0.1%, –0.1%, –4.0% ±200ppm
Signal Delays: Less than 2.5ms, INPUT to OMNIOUT, Fs = 48kHz
Fader:
100 mm motorized, Resolution =1024steps
+10dB to –138dB, –8dB all faders
Frequency Response: +0.5, –1.5dB 20 Hz - 20 kHz, refer to +4dBu output @ 1 kHz INPUT to OMNI OUT
Total Harmonic Distortion: Less than 0.05% 20 Hz - 20 kHz @ +4dBu into 600 Ohms INPUT to OMNI OUT, Input Gain= Min.
Hum & Noise: –128dBu typ., Equivalent Input Noise, Input Gain= Max., –88dBu, Residual output noise, ST master off
Dynamic Range: 112dB typ., D/A Converter, 108 dB typ., INPUT to OMNI OUT, Input Gain= Min.